ICBP Duo TH
ICBP Duo THICBP® Duo TH Oil Quenching comprises 2 independent chambers separated by a vacuum-tight door. This furnace is compatible with AMS 2750 E and suitable for the treatment of aeronautics parts. ICBP® Duo TH Oil Quenching does not need any pit installation which reduces the floor space. Quenchig cell can use hot or cold oil.
ICBP NanoICBP® Nano is the largest product in the range of Low Pressure Carburizing and carbonitriding furnaces, which uses technologies already proven on over 200 installations and 1000 ICBP® heating cells through out the world. The ICBP® Nano composes one module with 3 stacked up heating cells (which can be extended to 6 heating cells, corresponding to 2 heating modules) and gas quenching cells to cool the pieces. The carburizing cells are stacked up to reduce the footprint’s installation as much as possible. The ICBP® Nano integrates directly into the production line which allows it to reduce the cycle time while simplifying the flows between the machining and heating treatment.
ICBP FlexOur Flex is the most innovative and popular solution of ECM’s Low Pressure Carburizing furnaces range. The modular and compact design of the ICBP® Flex meets the highest demands in terms of productivity and part quality. The ICBP® Flex can receive oil quenching cells (hot or cold), simple gas or reversible dual stream (up to 20 bar) quenching and heating cells, their number depending on the required production capacity. Convective cells to high temperature tempering are also available. A light heat-insulating transfer machine ensures that loads can move from one cell to another. Our patents avoid the use of vacuum tight doors between different heating cells. An optional version AMS 2750 E is available. This modularity guarantees the possibility to mix any type of treatment recipe with a continuous workflow.
ICBP® JUMBO is the latest ECM solution design for the low pressure carburizing furnace range. It maintains all the compact and modular qualities of the ICBP® Flex however, design goes further in terms of volume and number of parts treated in a low pressure carburizing installation.
The major points of the ICBP® Jumbo:
• Can accommodate up to 12 cells in the same row
• Fully compatible with all versions of AMS2750E aerospace specification
• Compact systems with the cells facing one another and the possibility to have gas and oil quenching on the same installation
• Possibility to perform maintenance from the back AND the front of the cell DURING production thanks to rails on which the cells are mounted which make the maintenance position possible.
The transfer module is isolated and heated to guarantee quenching uniformity from one load to the next. This modularity guarantees the possibility to mix any type of recipe process with a continuous work flow.